Aluminum Champagne Finish 6063-T5 Wardrobe Customized Extrusion
Profile
Prodictopm Description
Packing : Protect film for each profile, shrink film / kraft paper
exterior for each bundle or pack as customer request.
FOB port: Foshan, Shenzhen, Guangzhou
Delivery time: 15-20 days after receiving the deposite.
Payment term: 30% deposite and 70% balance after the delivery
Material: 6063 Alloy
Temper: T5
Brand name: Kaiyamei Aluminum
Finish: Mill Finished, Anodizing, Electrophoresis, Powder Coating
,Polish, Wood grain, Sand Blasting
Color: Clear Satin, Bronze, Black, Golden, Silver,
Thickness: 0.8mm - 1.5mm
MOQ: 500KG. Usually 12 tons for a 20 feet container; 24 tons for a
40 feet container.
Length: 5.8-5.98m, or as customer's request
Sample delivery: Two weeks (one week for mould +one week making
sample)
Sample design: It is better we can get your drawing or sample, we
mainly make according to your design, and we can keep confidential
for your design.
Maximum extruder machine: 8000 tons; Minimum extruder machine: 500
ton
Mechanical Properties of Sections under Room Temperature
Alloy |
State | Tensile strength test | Hardness test |
| Tensile strength Rm M pa | Non-proportional Stretching Stress | Stretching rate | Pattern thickness | HV | HW |
| Rp0.2Mpa | (A50mm%) | mm | HV | HW |
|
| 6063 | T4 | 130 | 75 | 14 | - |
| T5 | 160 | 110 | 8 | 0.8 | 58 | 8 |
| T6 | 205 | 180 | 8 | - |
6061 | T4 | 184 | 110 | 16 | - |
| T6 | 265 | 245 | 8 | - |
6082 (6351) | T4 | 205 | 110 | 12 | - |
| T6 | 290 | 250 | 6 | - |
General Chemical Composition of Alloy
| Alloy | 6063(%) | 6061(%) | 6082(%) |
| Silicon Si | 0.20~0.60 | 0.40~0.80 | 0.7~1.2 |
| Iron Fe | 0.35 | 0.70 | 0.5 |
| Copper Cu | 0.10 | 0.15~0.40 | 0.1 |
| Manganese Mn | 0.10 | 0.15 | 0.4~0.8 |
| Manganese Mg | 0.45~0.90 | 0.18~1.2 | 0.6~0.8 |
| Chromium Cr | 0.10 | 0.04~0.35 | 0.25 |
| Zine Zn | 0.10 | 0.25 | 0.2 |
| Titanium Ti | 0.10 | 0.15 | 0.1 |
| Others(each) | 0.05 | 0.05 | 0.05 |
| Others | 0.15 | 0.15 | 0.15 |
| Aluminum | Remainder | Remainder | Remainder |
Electrophoretic coating surface treatment
Class | Film thickness um |
| Local thickness of anodize oxide film um | paint film local film thickness um | complex film local film thickness um |
| A | ≥9 | ≥912 | ≥21 |
| B | ≥9 | ≥7 | ≥16 |
| S | ≥6 | ≥15 | ≥21 |
Note: Electrophoretic paint profiles are supplied at B level, and
other grades can be supplied as required by customers.
|
Questions & Answer
Q1:What is aluminum extrusion, fabrication, and anodization?
A: Aluminum Extrusion refers to a process of creating shapes with
an aluminum billet or log by forcing it to flow through a shaped
opening in a die. Aluminum can be extruded into standard shapes or
specific designs depending on a customer’s preference.
Aluminum Fabrication refers to building aluminum components by
cutting, drilling, slotting, tapping,bending, CNC machining,
mechanical assembly and welding.
Q2: What’s the thickness for anodizing?
A: Our normal thickness is about 10 um.
Q3: What color you can do for powder coating? The thickness for
powder coat?
A: We can do any color for powder coat as long as you can provide
the color sample. Our normally powder coating thickness is 60-80um.
Q4: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar,
Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western
Wood, Snow Gum, etc. If you need any other colors, we can do
according to the color samples you provide.
Q5: What’s the delivery time for samples and mass production?
A: (1). 2-3 weeks to open the new moulds and make samples.
(2). 3-4 weeks after receipt of deposit and confirmation of the
order.
