Cabinet,Kitchen Material 6063 Anodized Finish flexibly OEM Aluminum
Profile
Product Description ♦
| Brand Name | Kaiyamei Aluminum |
| Material | 6063-T5 |
| Temper | T3 - T8 |
| Thickness |
General profiles thickness:0.8 - 5.0 mm;
|
| Color Thickness | Anodized protection thickness: 8 - 10μm Powder coating protection thickness: 40-80μm |
| Diameter | Customize |
| Length | 5.8-6.0m, or as cuostomer request |
| Color | RED, or as your requests |
| Surface Treatment | Mill finish , anodize, powder coating , elecrophoresis ,PVDF
coating, all kinds of high simulation wood grain processing , etc. |
| Deep Processing | Cutting , punching . |
| Manufacture Technological Process | Aluminum ingot → Melting and casting → Homogenizing → Extrusion →
Aging → Powder coating → Pouring rubber for heat insulation →
Acceptance test → Packing → Warehouse → Delivery |
| Certification | ISO 9000 ; ISO 9001 ; ISO 14000 ; CQC ; RoHS |
| Markets We Sold | Australia , Germany , North America , Africa and European countries
and Southeast Asian area |
Our profiles advantages ♦
(1) Complex integral shapes
(2) Cost effective
(3) Low tooling costs
(4) Design flexibility
(5) Versatility in joining
(6) Machinable
(7) Rapid prototyping
(8) Short delivery
(9) Wide range of finishes
(10) Plenty of patterns and colors for your choice.
(11) Strict control for surface finish, very little scratch.
(12) Accurate mold as well as accurate size.
(13) Standard alloy composition
(14) Both ends of the profiles are very plain and with no burr.
Anodized surface treatment
Anodized surface treatment: minimum partial thickness of coating on
decorative surface around 8μm - 10μm.
|
Powder coating surface treatment
Powder coating surface treatment: minimum partial thickness of
coating on decorative surface≥40μm;Maximum partial thickness≤120μm.
|
Electrophoretic coating surface treatment
Class | Film thickness um |
| Local thickness of anodize oxide film um | paint film local film thickness um | complex film local film thickness um |
| A | ≥9 | ≥912 | ≥21 |
| B | ≥9 | ≥7 | ≥16 |
Note: Electrophoretic paint profiles are supplied at B level, and
other grades can be supplied as required by customers.
|
FAQ ♦
Q1: What is aluminum extrusion, fabrication, and anodization?
A: Aluminum Extrusion refers to a process of creating shapes with
an aluminum billet or log by forcing it to flow through a shaped
opening in a die. Aluminum can be extruded into standard shapes or
specific designs depending on a customer’s preference.
Aluminum Fabrication refers to building aluminum components by
cutting, drilling, slotting, tapping,bending, CNC machining,
mechanical assembly and welding.
Aluminum Anodization is an electro-chemical process of coating
aluminum with a thin layer of oxide to increase corrosion
resistance and harden the surface.
Aluminum also can be dyed with various anodizing colours,which in
most widely used is Brone shades.
Q2: What’s the thickness for anodizing? Can you do 15um?
A: Our normal thickness is about 10 um. Yes, we can do 15um and
above.
Q3: What color you can do for powder coating? The thickness for
powder coat?
A: We can do any color for powder coat as long as you can provide
the color sample. Our normally powder coating thickness is 60-80um.
Q4: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar,
Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western
Wood, Snow Gum, etc. If you need any other colors, we can do
according to the color samples you provide.
Q5: What’s the delivery time for samples and mass production?
A: (1). 2-3 weeks to open the new moulds and make samples.
(2). 3-4 weeks after receipt of deposit and confirmation of the
order.
About us :
Package: Protect film for each profile, shrink film / kraft paper exterior
for each bundle or pack as customer request.
FOB port: Foshan, Shenzhen, Guangzhou
Delivery time: 15-20 days after receiving the deposite.
Payment term: 30% deposite and 70% balance after the delivery
Foshan Kaiya Aluminum Co., Ltd is a comprehensive and professional
enterprise integrating research, design production and sales of
aluminium extrusion profiles for construction and industrial
applications. There are currently 24 aluminum extrusion process
lines at 500MT TO 2500MT, 5 process lines for anodizing, 3 process
lines for powder coating, 2 process line for painting, 2process
line of polishing and brushing. We still have 2 packing line. Our
annual production capacity has reached 80,000 tons which is at the
forefront of the aluminium industry in China.
